Overview - Engine/Motor Coolant Temperature Sensor

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Temperature Sensor Components Location

Courtesy of AUDI

Clip
- Check for secure fit
O-Ring
- Always replace after removing
- Coat with coolant
Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Removing and Installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
O-Ring
- Installation instructions. Refer to OVERVIEW - ENGINE/MOTOR COOLANT TEMPERATURE SENSOR .
O-Ring
- Installation instructions. Refer to OVERVIEW - ENGINE/MOTOR COOLANT TEMPERATURE SENSOR .
Bolt
- Tightening specification. Refer to OVERVIEW - ENGINE/MOTOR COOLANT TEMPERATURE SENSOR .
Engine Coolant Temperature Sensor -G62-
- on transmission side of the cylinder head
- Removing and Installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .