LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cooling System (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Ea 888 Generation III)) (DSNA)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING >> Removing

Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

All additional procedures are described under ENGINE COOLANT TEMPERATURE SENSOR -G62-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals