LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cooling System (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Ea 888 Generation III)) (DSNA)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Additional procedures:

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant connection with connector coupling. Refer to Refer to Figure.

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals