Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ignition coil for cylinder "3". Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Release the retainers -arrows- and remove wiring duct -1- from bracket.

Fig 1: Identifying Bracket And Bolts

Courtesy of AUDI

-- Disconnect the coolant hoses -arrows- with Hose Clamps - Up To 25mm:3094 .

Courtesy of AUDI

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -1- and remove the upper coolant pipe.