Control Module, Removing And Installing, Generation V: Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

If a new control module is installed, a basic setting must be performed.

-- Connect the Vehicle Diagnostic Tester with the vehicle and start the Diagnostic mode.

Select vehicle test
All wheel drive (AWD) 5
01 OBD-capable system
22 All-Wheel Drive Control Module J492
22 AWD electronics, functions
22 Control module, replacing

-- Follow the instructions in the display.