LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Assembly (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Ea 888 Generation III)) (DSNA)) >> 10 Engine Assembly >> Assembly Mounts >> Pendulum Support, Removing And Installing >> Removing

Pendulum Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -1, 2 and 3- and remove the pendulum support.

Fig 1: Engine Support Component Location
GWWA10-11615Courtesy of AUDI
scientia non olet · About LEMON Manuals