Overview - Stabilizer Bar
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Lower Transverse Link
- Nut
- Replace after removing
- 20 Nm +180°
- Coupling Rod
- Removing and Installing. Refer to COUPLING ROD, REMOVING AND INSTALLING .
- Bolt
- Install evenly
- Replace after removing
- 20 Nm +90°
- Bolt
- Replace after removing
- Nut
- Counterhold at connecting link socket head when tightening
- 55 Nm
- Stabilizer Bar
- With rubber bushings
- Removing and Installing. Refer to STABILIZER BAR, REMOVING AND INSTALLING .
- Subframe