Grease After Pressed in
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- The kidney-shaped area -1- of the bonded rubber bushing must be lubricated.
-- Apply the Grease:G 052 150 A2 evenly from above with a brush.
- The contact surfaces to the control arm must not come in contact with grease.
Required quantity of grease
- For both kidney-shaped areas apply a fat thread -a- approximately 10 mm long.
-- Apply half the quantity of grease approximately 5 mm in each kidney-shaped area.