Sunroof Shade Motor -V260-, ADAPTING

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• 0001 - OBD-capable systems
• 00CA - Sunroof Control Module J245
• 00CA - Sunroof Control Module J245 Functions
• 00CA - Basic setting
• 00CA - Roof Shade Control Module J394, no basic setting

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.