Sunroof Motor -V1-, PROGRAMMING
CAUTION:
Moving the slotted guide rail guide increases the risk of damaging the sliding sunroof components.
- Move the slotted guide rail guide only when the glass panel is installed.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- 0001 - Diagnostic-Capable System
- 00CA - Sunroof Control Module J245
- 00CA - Sunroof Control Module J245 Functions
- 00CA - Basic setting
- 00CA - Sunroof Control Module J245, no basic setting
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.