REAR LID DRIVE UNIT Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, ADAPTING

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• 0001 - Diagnostic-Capable System
• 006D - Rear Lid Electronics J605
• 006D - Rear Lid Control Module, Functions
• 006D - Basic Setting, Rear Lid Control Module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.