Vibration Damper, Removing And Installing: Notes

Special tools and workshop equipment required 

• Counterhold - Vibration Damper: T10355 
  Fig 1: Counterhold - Vibration Damper T10355

  Courtesy of AUDI OF AMERICA, LLC
• Wrench - 21mm: T40263 
  Fig 2: Identifying Wrench - 21mm

  Courtesy of AUDI OF AMERICA, LLC
• Adapter: T40314 
  Fig 3: Adapter T40314

  Courtesy of AUDI OF AMERICA, LLC
• Vibration Damper Assembly Tool: T10531 
  Fig 4: Assembly Tool Set T10531

  Courtesy of AUDI OF AMERICA, LLC

Individual Components of the Vibration Damper Assembly Tool: T10531  :

• Vibration Damper Assembly Tool - Counterhold Tool: T10531/1 
• Vibration Damper Assembly Tool - Tensioning Pins: T10531/2 
• Vibration Damper Assembly Tool - Turning Over Tool: T10531/3 
• Vibration Damper Assembly Tool - Knurled Nut: T10531/4 

• The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.
  Fig 5: Locating Vibration Damper Bolt

  Courtesy of AUDI OF AMERICA, LLC