Ribbed Belt, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt. Refer to Figure.

-- Turn the tensioning system slightly in the direction of -arrow- and remove the Locking Pin: T10060A  .

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.

There are different procedures depending on the model. Refer to RIBBED BELT, REMOVING AND INSTALLING .