Sensor Wheel, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Always replace the sensor wheel -2- each time the bolts -1- are loosened.

Fig 1: Identifying Attachment Points, Countersunk Screws, Crankshaft & Sensor Wheel

Courtesy of AUDI OF AMERICA, LLC

• After tightening a second time, the attachment point of the countersunk bolts in the sensor wheel is so deformed that the bolt heads are at the crankshaft -3- -arrows- and the sensor wheel is loose under the bolts.
• Installing the sensor wheel is only possible in one position - the bores are offset.

-- After replacing the sensor wheel perform an adaptation. Refer to Vehicle Diagnostic Tester.