Coolant Pump Toothed Belt, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Note the toothed belt sprocket installation location -item  : Toothed Belt Sprocket.
• Replace bolts that were tightened with an additional turn after removing them.

-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 2 -F446- /Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .