LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System 2.0L >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Coolant Pipe, Removing And Installing >> Removing

Front Coolant Pipe, Removing And Installing: Removing

GWWA23-10658Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 3-.

-- Release the catch -arrow- and remove the cover -2-.

-- Free up the coolant hose -2-.

GWWA23-10659Courtesy of AUDI OF AMERICA, LLC

-- Open the catches -arrows- and remove the upper air duct -1-.

-- Remove the bolt -arrow- on the left and right.

GWWA23-10689Courtesy of AUDI OF AMERICA, LLC

-- Unclip and remove the lower section -1- of the air duct.

-- Place a cloth underneath to catch any escaping coolant.

Fig 1: Identifying Coolant Hose Clamps
GWWA19-11612Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hoses -1 and 2- using the Hose Clamps - Up To 25mm: 3094  .

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -arrows- and the front coolant pipe.