Overview - Stabilizer Bar

Fig 1: Exploded View Of Stabilizer Bar

Courtesy of AUDI OF AMERICA, LLC

Lower Transverse Link
Nut
- Replace after removing
- 20 Nm +180°
Coupling Rod
- Removing and Installing. Refer to COUPLING ROD, REMOVING AND INSTALLING .
Bolt
- Install evenly
- Replace after removing
- 20 Nm +90°
Bolt
- Replace after removing
Nut
- Counterhold at connecting link socket head when tightening
- 55 Nm
Stabilizer Bar
- With rubber bushings
- Removing and Installing. Refer to STABILIZER BAR, REMOVING AND INSTALLING .
Subframe