Overview - Tie Rod

Fig 1: Exploded View Of Tie Rod

Courtesy of AUDI OF AMERICA, LLC

Subframe
Bolt
- Replace after removing
- Tighten the threaded connections in curb weight position. Refer to VEHICLES WITH COIL SPRINGS, CHECKING THE CURB WEIGHT POSITION FOR AXLE ALIGNMENT .
- 70 Nm + 180°
Wheel Bearing Housing
Tie Rod
- Removing and Installing. Refer to TIE ROD, REMOVING AND INSTALLING .
Bolt
- Replace after removing
- 70 Nm + 180°
Nut
- Replace after removing