Brake Pads, Removing And Installing, Single-Piston Brake: Removing
- Label the brake pads when removing if they are going to be used again. Install in the same position, otherwise the braking effect will be uneven.
-- Remove the affected front wheel. Refer to WHEELS AND TIRES .
-- Remove the bolts -arrows- by counterholding at the guide pins -1 and 2-.
-- Remove the brake caliper.
CAUTION:
There is a risk of damaging the brake hose due to the weight of the brake caliper.
- Never let the brake caliper hang on the brake hose.
-- Hang the brake caliper using a suitable wire.
CAUTION:
There is a risk of damaging the brake caliper piston if handled incorrectly.
- Never activate the brakes if the brake caliper is removed.
-- Disconnect the connector -arrow- for the brake pad wear indicator contact from the right brake caliper.
-- Remove the brake pads.