Brake Caliper, Removing And Installing, Single-Piston Brake: Removing
-- Remove the affected front wheel. Refer to WHEELS AND TIRES .
-- Disconnect the connector -arrow- for the brake pad wear indicator contact from the right brake caliper.
- For easier removal of the brake caliper from the brake rotor, push the brake pad -3- back slightly with suitable pliers -1- as shown.
- To prevent damage to the surface on the brake caliper, place a piece of rubber -2- or similar between the pliers and brake caliper.
-- Remove the bolts -arrows- and carefully remove the brake caliper with the brake carrier and the installed brake pads from the brake rotor.
CAUTION:
There is a risk of damaging the brake hose due to the weight of the brake caliper.
- Never let the brake caliper hang on the brake hose.
-- Hang the brake caliper using a suitable wire.
CAUTION:
There is a risk of damaging the brake caliper piston if handled incorrectly.
- Never activate the brakes if the brake caliper is removed.