Vacuum, Creating With Hand Vacuum Pump

Special tools and workshop equipment required 

• Hand Vacuum Pump: VAS6213 

In certain situations, the vacuum can be created using a : VAS6213  instead of using the engine or a vacuum pump.

-- To do so, connect the : VAS6213  to the vacuum hose from the connection -B- to the : VAS6721  .

-- Open the shut-off valve -B-.

-- Create the vacuum using the : VAS6213  until a vacuum between 600 and 950 mbar (8.7 and 13.77 psi) is displayed on the : VAS6721  .

-- Then perform the relevant tests.