Dust Cap, Removing And Installing: Removing
- Brake caliper piston is driven back.
- The parking brake motor is removed. Refer to Left Parking Brake Motor -V282- /Right Parking Brake Motor -V283-, REMOVING AND INSTALLING .
- Install the entire repair kit when servicing.
CAUTION:
There is a risk of destroying the ball thread by removing from the brake caliper piston and thrust nut.
- Never completely remove the brake caliper piston and thrust nut.
-- Remove the brake caliper piston maximum 20 mm -dimension a- counter-clockwise -arrow- using the : T10621 .
-- Remove the protective cap from the brake caliper using the : 3409 .