Brake Booster, Removing And Installing, Electromechanical Brake Booster: Removing

-- Remove the brake master cylinder. Refer to BRAKE MASTER CYLINDER, REMOVING AND INSTALLING, ELECTROMECHANICAL BRAKE BOOSTER .

Vehicles with high-voltage system: 

-- Remove the bracket for the Electric Drive Power and Control Electronics -JX1-. Refer to the appropriate Service Information .

Continuation for All Vehicles: 

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -arrow-.

-- Disconnect the brake pedal from the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .

-- Remove the nuts -3 and 4- for the brake booster.

Courtesy of AUDI OF AMERICA, LLC

-- Pull the brake booster off the bonding on the bulkhead and remove it.