Overview - Door
- Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .
- Bolt
- 33 Nm
- Door Arrester
- Removing and Installing. Refer to DOOR ARRESTER, REMOVING AND INSTALLING .
- Installation position. Refer to Fig 3.
- Cap
- For the door arrester
- Installation position. Refer to Fig 2.
- Bolt
- Quantity: 2
- 8 Nm
- Hinge
- Upper
- Bolt
- 45 Nm
- 40 Nm, to do so use the following special tools. Refer to SIDE AND LENGTH ADJUSTMENT AT HINGE - .
- Bolt
- 32 Nm
- Nut
- 32 Nm
- Set Screw
- 23 Nm
- Cap
- Bolt
- 32 Nm
- Bolt
- 32 Nm
- Hinge
- Lower
- Set Screw
- 23 Nm
- Cap
- Bolt
- 45 Nm
- 40 Nm, to do so use the following special tools. Refer to SIDE AND LENGTH ADJUSTMENT AT HINGE - .
Cap Installation Position
In the installed position, the lettering on the cap -1- must be readable in the upper installation position.
2 - LEFT UPPER REAR - left / RIGHT UPPER REAR - right
3 - HL - left / HR - right
Door Arrester Installation Position
In the installed position, the lettering on the door arrester -1- must be readable in the upper installation position:
2 - HL - left / HR - right