Cover And Cushion, Removing And Installing, Q3 Seat Cushion: Removing

-- Move the front seats all the way forward.

-- Position the rear seat all the way toward the rear.

-- Unclip the child seat anchor cover -1- from the anchor in direction of -arrow- and remove.

Fig 1: Unclipping Latch Child Seat Anchor Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Push the child seat anchor guide -1- downward according to the cut-out, and disengage it from the anchor -2-.

Fig 2: Pushing Latch Child Seat Anchor Guide -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the child seat anchor guide forward in direction of -arrow-.

-- Repeat the procedure for the second child seat anchor.

-- Use both hands to grab under the seat cushion -2- on one side.

Courtesy of AUDI OF AMERICA, LLC

-- Using both hands, pull the seat cushion upward with force in direction of -arrow A- to release the seat cushion from the mount -1-.

-- Repeat the procedure on the other side of the seat cushion in direction of -arrow B-.

-- Tilt the seat cushion upward and disengage at the back of the seat frame.

-- Remove the seat cushion.