Lower Center Cushion, Removing And Installing, Q3: Removing

-- Move the front seats all the way forward.

-- Position the rear seat all the way toward the rear.

-- Remove the driver side seat cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, Q3 SEAT CUSHION .

-- Fold the pass-through forward.

-- Open the backrest cover on the clamping strips -1- by removing the cover -2- with the flat profile upward in direction of -arrow- out of the U-profile on the pass-through -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Use a flat-head screwdriver to pry out the clamping strip -1- for the cover from the backrest frame and remove.

Courtesy of AUDI OF AMERICA, LLC

-- Fold the pass-through -2- toward the rear.

-- At the same time, remove the cover and center cushion -3- under the pass-through forward in direction of -arrow-.

-- Disengage the cover on the center cushion.

-- Disengage the center cushion on the rear seat backrest and remove from the cover.