Locking Mechanism Trim For Backrest With Pass-Through, Removing And Installing, Q3: Removing
-- Move the front seats all the way forward.
-- Position the rear seat all the way toward the rear.
-- Fold the backrest with pass-through slightly forward.
-- Remove the center headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Remove the left headrest guide in the center backrest. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .
-- Push the scraper from the Scraper Set: VAS6845 at the indicated position and engage the locking tab in direction of -arrow A-.
-- Remove the trim -1- upward from the pass-through in direction of -arrow B-.