Seat Depth Adjuster, Removing And Installing, Q3: Removing

-- Remove the trim from the seat depth adjuster. Refer to SEAT DEPTH ADJUSTER TRIM, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the hooks -arrows-, and fold the retaining plate with cushion and cover toward the rear.

-- Disengage the contour wire on the left and right side from the hooks -A arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Using the Hook Tool: T40207  , disengage the cover clamping strip from the hooks -B arrows-.

-- Move the seat depth adjuster back again, so that the bolt heads -arrows- are accessible.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts by counterholding the nuts at the bottom.

-- Unclip the seat depth adjuster -1- at the tabs -A arrows- and remove upward from the seat pan.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the seat depth adjuster at the tabs -B arrows- from the seat pan.