Hood Latch, Removing And Installing: Removing
Q3:
-- Remove the bolts -1 and 3-.
-- Release the catch -arrow- and remove the cover -2-.
-- Free up the coolant hose -2-.
-- Release the catches -arrows- and remove the air duct upper section -1-.
-- Remove the bolt -arrow- on the left and right.
-- Unclip and remove the lower section -1- of the air duct.
RS Q3:
-- Remove the bolts -arrows- and air duct -1-.
Vehicles with left washer fluid reservoir:
-- Loosen the washer fluid reservoir filler neck from the lock carrier. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
Continuation:
-- Disconnect the connector -2-.
-- Free up the connector -1-.
-- Free up the release cable -4- on the lock carrier -5-.
-- Remove the bolts -arrows-.
-- Remove the hood latch -3- downward.
-- Release the catches -4- and remove the cable bracket from the mount -3- -arrow-.
-- Pull the release cable nipples -1 and 2- out of the release levers on the hood latch.
-- Remove the hood latch.