Release Button in Rear Lid Handle -E234-, REMOVING AND INSTALLING: Removing
-- Remove the license plate.
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Equipped on some models: remove the rear lid closing aid motor. Refer to Rear Lid Closing Aid -VX16-, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Equipment versions with rearview camera: disconnect the antenna wire -2- and the connector -1-.
-- Disconnect the connector -3-.
-- Release the side tabs -arrows A- and remove the button -1- outward in direction of -arrow B-.