Headrest Guide, Removing And Installing, Q3: Removing
-- Fold the backrest slightly forward.
-- Remove the rear headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Guide the Hook: T10538 in the headrest guide and as shown engage in the retainer.
-- Right headrest guide -1- : pull the locking tab -3- from the headrest guide with the hook inward in direction of -arrow C- and at the same time guide the headrest guide upward from the backrest frame in direction of -arrow B-.
-- Left headrest guide -2- : pull the frame -4- from the headrest guide with the hook inward in direction of -arrow A- and at the same time guide the headrest guide upward from the backrest frame in direction of -arrow B-.
TIP:
If the headrest guide does not release, proceed as follows:
-- Insert the Internal Puller (Kukko 21-1): VAS251601 only to dimension -a- in the headrest guide and tighten the nut.
- Dimension -a- = 20 mm.
-- Position the Puller - Unit Injector: T10055 with the Puller - Unit Injector - Adapter 3: T10055/3 on the Internal Puller (Kukko 21-1): VAS251601 and remove the headrest guide.