LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Communication (1 Of 2) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> TV Antenna Amplifier 2 -R83-, REMOVING AND INSTALLING >> Removing

TV Antenna Amplifier 2 -R83-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -1 and 3- from the TV Antenna Amplifier 2 -R83- -2-.

Fig 1: Identifying Antenna Amplifier -R24-
GWWA91-11772Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw -4- several turns and remove the TV Antenna Amplifier 2 -- -2- from the rear lid.