Drivetrain Control Module -J775-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

Activate the control module after installing a new Electronic Damping Control Module -J250- :

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Drivetrain
• Suspension control
• 01 - OBD-capable systems
• 74 - Drivetrain Control Module J775
• 74 - Drivetrain Control Module Functions
• 74 - Control module, replacing

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.