Rear Upper Transverse Link, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Before starting the procedure, determine the curb weight position. Refer to WHEEL BEARING IN CURB WEIGHT POSITION, LIFTING VEHICLES WITH COIL SPRING .
-- FWD equipment version: Lower the subframe and do not remove the brake caliper and shock absorber while doing so. Refer to SUBFRAME, REMOVING AND INSTALLING .
-- AWD equipment version: Remove the subframe. Refer to SUBFRAME, REMOVING AND INSTALLING .
-- Disconnect the threaded connection -3-.
-- Remove the bolt -1- and remove the upper transverse link -2-.