4-Cylinder Diesel Engine 2.0L TDI
WARNING: This page is about a different variant/trim than selected.
Removal Procedure:
-- Carefully pull the engine cover off of the retaining pins -arrows- one after the other.
Installation Procedure:
-- Position the engine cover on the retaining pins and press onto the retaining pins by hand one after the other.
-- To avoid damage, do not hit the engine cover with fist or a tool.
-- Position the engine cover and at the same time, pay attention to the oil filler tube and oil dipstick.
-- Press the engine cover first in the rubber grommets on the left side and then in the rubber grommets on the right side.