LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 53 (General Information) >> General Information >> Maintenance Work >> Wheel Bolts, Tightening To Specification >> Procedure

Wheel Bolts, Tightening To Specification: Procedure

WARNING: This page is about a different variant/trim than selected.

The adapter to loosen/tighten the anti-theft wheel bolts is located in the vehicle tool kit.

Procedure: 

-- Remove the wheel bolt caps.

-- Tighten the wheel bolts diagonally to the specified tightening specification (for testing values and process specifications table. Refer to Testing Values and Process Specifications Table: ).

-- Press the wheel bolt caps on all the way using tool 8Z0.012.287.

-- If the adapter from the vehicle tool kit was used for the anti-theft wheel bolts, put the adapter in the vehicle tool kit.

scientia non olet · About LEMON Manuals