REDUCING AGENT (ADBLUE®), FILLING USING AdBlue Filling System: VAS6960

Special tools and workshop equipment required 

• AdBlue® Filling System: VAS6960 
  Fig 1: AdBlue® Filling System VAS6960

  Courtesy of AUDI OF AMERICA, LLC

Procedure: 

-- Open the fuel filler door and remove the cap for the reducing agent tank.

-- Using a lint-free cotton cloth soaked in water, clean the filler neck for the reducing agent.

-- Guide the nozzle on the AdBlue® Filling System: VAS6960  into the reducing agent tank filler neck.

-- Operate the nozzle and completely fill the reducing agent.

-- Remove the nozzle from the reducing agent tank filler neck.

-- Use a lint-free cotton cloth soaked in water to clean the reducing agent tank filler neck and cap.

-- Attach the cap for the reducing agent tank.