Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Spark Plug Removal Tool :3122B
Puller - Valve Seal :3364
Seal Installer - Valve Stem :3365 for the valve stem seal with a single sealing lip. Refer to Figure.
Fitting Tool :T40376/1 for the valve stem seal with a double sealing lip. Refer to Figure.
Valve Keeper Tool Kit :VAS5161A with the Valve Cotter Tool Kit - Guide Plate :VAS5161/19C
Valve Cotter Tool Kit - Adapter :T40012
Mounting Sleeve. Refer to Parts Information