Sliding Bar Ball, Installing

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Installing

Fig 1: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in direction of -arrow A- using the :T40191/1 and hold.

-- Push the sliding bar -3- in direction of -arrow B-.