Upper Timing Chain Cover, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
- Replace the gaskets and seals if damaged or leaking.
- Replace the O-rings after removing them.
-- Coat the seals and the O-rings with engine oil.
- Seal installation position: smaller inner diameter outward.
-- Install the camshaft adjustment valves. Refer to Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .
-- Install the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .