Guide Link, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm: VAG1332
- Torque Wrench 1332 Insert - Ring Wrench - 21mm: VAG1332/7
- Engine and Gearbox Jack: VAS6931
- Puller - Ball Joint: T40043
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Nut - Guide Link to Wheel Bearing Housing
- Bolt/Nut - Guide Link to Subframe