Overview - Engine Oil Cooler

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Engine Oil Cooler Components

Courtesy of AUDI OF AMERICA, LLC

Sub-Assembly Bracket
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Seal
- Replace after removing
O-Rings
- Replace after removing
- Coat with engine oil
Mechanical Switch Valve
- Removing and Installing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
Engine Oil Cooler
- See note. Refer to If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent subsequent damage. Replace the additional oil spray jet, engine oil cooler and oil filter. .
- Removing and Installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Bolt
- 8 Nm +45°
- Replace after removing