Crankshaft, Measuring Axial Clearance

Special tools and workshop equipment required 

• Dial Indicator Holder :VW387 
• Dial Indicator - 0-10mm :VAS6079 

Procedure

Fig 1: Identifying VAS 6079 & VW 387

Courtesy of AUDI OF AMERICA, LLC

-- Attach the :VAS6079  with the :VW387  to the cylinder block and place it against the crankshaft counterweight.

-- Press the crankshaft against the dial gauge by hand and set the dial gauge to "0".

-- Press the crankshaft off the dial gauge and read the measurement.

Axial clearance:

• New: 0.070 to 0.231 mm.
• Wear limit: 0.30 mm.