Engine, Securing To Engine And Transmission Holder

Special tools and workshop equipment required 

• Engine and Transmission Holder: VAS6095A 

Procedure 

• Engine engaged with the : 2024B  on the : VAS6100  . Refer to ENGINE, REMOVING FROM SCISSOR LIFT TABLE .

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- Remove the intermediate plate. Refer to Fig 1.

Fig 1: Installing Intermediate Plate

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left alignment sleeve from the cylinder block.

-- Secure the engine to the : VAS6095A  -1-.

Courtesy of AUDI OF AMERICA, LLC

Assembling 

Assemble in the reverse order of removal. Note the following:

-- Insert the left alignment sleeve into the cylinder block.

-- Install the intermediate plate. Refer to Fig 1.

-- Install the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .