Window Guide, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move the door window into the "open" position.
-- Remove the window frame trim panel. Refer to the appropriate service information .
-- Remove the door inner cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Remove the window regulator motor. Refer to WINDOW REGULATOR MOTOR, REMOVING AND INSTALLING, A4 AND A5 SPORTBACK .
-- Pull the window guide -1- away from the C-pillar trim -2- slightly.
-- Remove the bolt -arrow- for the guide rail and push the window guide into the C-pillar trim guide.
-- Move the door window into the "closed" position.
-- Remove the window guide -3- from the guide rail -4-.
-- Remove the bolt -1-.
-- Remove the guide rail pulling it forward -arrow-. Doing so loosens the retainer -2-.
-- Remove the guide rail.