Overview - Underbody Bracing, A5 Cabriolet

WARNING: This page is about a different variant/trim than selected.

Fig 1: Underbody Bracing, A5 Cabriolet

Courtesy of AUDI OF AMERICA, LLC

Diagonal Brace
- Rear
- Right
- Removing and Installing. Refer to REAR DIAGONAL BRACES, REMOVING AND INSTALLING, A4 AND A5 .
Bolt
- 50 Nm + 90°
- Replace after removing.
- Quantity: 3
Tunnel Brace
- Removing and Installing. Refer to TUNNEL BRACE, REMOVING AND INSTALLING .
Impact Guard
- Right
- With foam pad and expanding clip
- Removing and Installing. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
Bolt
- 50 Nm + 90°
- Replace after removing.
- Quantity: 2
Diagonal Brace
- Front
- Right
- Removing and Installing. Refer to FRONT DIAGONAL BRACES, REMOVING AND INSTALLING .
Diagonal Brace
- Front
- Left
- Removing and Installing. Refer to FRONT DIAGONAL BRACES, REMOVING AND INSTALLING .
Bolt
- 50 Nm + 90°
- Replace after removing.
- Quantity: 2
Impact Guard
- Left
- With foam pad and expanding clip
- Removing and Installing. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
Bolt
- 55 Nm
- Quantity: 4
Bolt
- 50 Nm + 90°
- Replace after removing.
- Quantity: 2
Diagonal Brace
- Rear
- Left
- Removing and Installing. Refer to REAR DIAGONAL BRACES, REMOVING AND INSTALLING, A4 AND A5 .