Spoiler, Removing And Installing, RS 5: Removing

WARNING: This page is about a different variant/trim than selected.

-- Mark the installation position of the spoiler.

-- Secure the removal device -1- at the lower left of the window opening.

Courtesy of AUDI OF AMERICA, LLC

-- Position the : VAS861001/1A around the spoiler -2-.

-- Secure the outer end of the : VAS861001/1A at the idler pulley on the removal device.

-- Push the inner end of the : VAS861001/1A in the reel device -arrow-.

-- Tension the cutting cord with the reel device.

-- Cut the spoiler free and remove it.