Sill Panel Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
Versions with illuminated sill panel:
-- Remove the front sill panel. Refer to OVERVIEW - SILL PANEL .
-- Loosen the inner door seal in the area of the wiring harnesses.
-- Push the carpet to the side.
-- Disconnect the connector -1- and free up the wiring harness -2-.
Continuation:
-- Carefully warm up the sill panel trim -1- using the : VAS1978/14A .
-- Carefully pry out the sill panel trim from the side sill in direction of -arrow- using the : 3409 . Do not damage the paint coat while doing so.