LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Hinges, Removing And Installing >> Hinges, Removing And Installing, A4 AVANT >> Removing

Hinges, Removing And Installing, A4 AVANT: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

-- If equipped, remove the rear lid motor. Refer to REAR LID MOTOR 1 AND 2 -V444- / -V445-, REMOVING AND INSTALLING, A4 AVANT .

-- Push the expanding pin -4- through.

GWWA55-11295Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1 and 5- and remove the wiring harness bracket -3- from the mount on the hinge -2-.

-- Free up the wiring harness.

-- Remove the left and right gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Close the rear lid.

-- Remove the bolts -1 and 2- and nut -4-.

GWWA55-11208Courtesy of AUDI OF AMERICA, LLC

-- Remove the hinge -3-.