Latch Release Cable, Removing And Installing: Removing

-- Remove the vehicle electrical system control module bracket. Refer to OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .

-- Loosen the release cable -2- from the cable bracket -3- and disengage the release cable nipple -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove the housing cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the release cable -4- from the cable bracket -3- and disengage the release cable nipple -2-.

-- Free up the release cable at the lock carrier and the body.

-- Remove the grommet and remove the release cable outward.

-- Remove the latch. Refer to LATCH, REMOVING AND INSTALLING .

-- Release the retainers in direction of -arrows- and remove the housing cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the release cable -4- from the cable bracket -3- and disengage the release cable nipple -2-.

-- Release the catches and remove the coupling from the lock carrier.

-- Free up the release cables and guide them out of the lock carrier.